MEETING ROOM
Transcript: The best solution to protect against wiretapping (eavesdropping) is a specially designed room using the installation of a Farraday cage. This technology does not allow leakage of any signals from the protected area. Shielding effectiveness will prevent the spread of any signals: radio signals, Bluetooth, infra-red signal, GPS signal, GSM signals of 3G, 4G, LTE, WiFi, GPRS, CDMA, micro-wave signals (MW) Construction of the chamber Inside the cubicle, in the interspace of the lowered suspended ceiling, there is air-conditioning, ventilation and heating distribution connected via special filters (honeycombs) to the central systems installed in the building. The room access and electronic security system controls and protects the room against unauthorized access and possible installation of hidden recording devices. The access system may be provided with the latest technology based on the biometric. These filters are included in the shielded cubicle and each input and output must be "filtered". The filters achieve high shielding efficiency and protect the room against electromagnetic interference (EMI). Attenuation of voltage filters is 100dB from 14kHz to 18GHz, measured according to MIL.STD-220A and compatible Mil-F-15233. Security and Access control www.probin.cz Tomáš Rathouský phone: +420 222 364 405 Mobile: +420 606 654 127 e-mail: rathousky@probin.cz CONFIDENTIAL MEETING ROOM PROBIN design Voltage filters, electric installation and cabling, electronic security system Doors and windows Final room - interior The Entrance door is the critical point of the shielded cubicle. The structure of the door must comply with requirements for high shielding efficiency. This unique technical design of double-pivoting system of closing the door ensures a long life-cycle of the seal and stable shielding efficiency. If needed, barrier-free access to the cubicle can be arranged by using a sliding door. The industrial design of the door is an interesting technical complement of each interior. White noise generator. The walls and tubes of the air-conditioning and ventilation system are fitted with piezo-inverters connected to a sophisticated white noise generator. This technology provides protection against potential installation of a stethoscopic or the other microphone on the outer room walls. Ventilation, AC and heating Installation is based on modular system technology which is clean and allows construction of the chamber with minimum disruption in the customer's premises. The 2mm thick steel panels are zinc-coated on both sides, fitted with 40mm perforated flange along their circumference and they are joined together using a highly effective EMC seal. The advantage of this solution lies in its variability which allows the installation of the shielded cubicle in irregular shaped rooms. In addition, the modular system allows disassembly and reassembly of the cubicle in a new place at a minimum cost. Purpose of the shielded room The Windows are not installed in the room, with respect to security risks and high installation expenses.