Loading presentation...

Present Remotely

Send the link below via email or IM

Copy

Present to your audience

Start remote presentation

  • Invited audience members will follow you as you navigate and present
  • People invited to a presentation do not need a Prezi account
  • This link expires 10 minutes after you close the presentation
  • A maximum of 30 users can follow your presentation
  • Learn more about this feature in our knowledge base article

Do you really want to delete this prezi?

Neither you, nor the coeditors you shared it with will be able to recover it again.

DeleteCancel

Fibre to the HOME

No description
by

Chayanee Prateepsawangwong

on 1 November 2016

Comments (0)

Please log in to add your comment.

Report abuse

Transcript of Fibre to the HOME

1. Ping EDIMAX
2. Run Wizard
3. Switch to Range Extender Mode
5. 192.162.1.2
6. Selecting Range Extender Mode
7. Cannot Broadcast 5GHz
8. Fixed EDIMAX IP
1. Selecting WISP Mode
2. Frequency Used (from host)
3. Host Selecting
4. Host SSID Password
5. Obtain IP From Host
6. Obtain DNS From Host
7. SSID Setup
8. Disable Proxy
BBCS (bbcs.ais.co.th)
Slow Speed
Incorrect Symptom
SMART 7.0 (network.ais.co.th/AirnetWeb)
Check Customer Device
Order History
Employee Service
Bandwidth Down Stream
Bandwidth Up Stream
EMS
WLAN Configuration
Binding Port VLAN 30
Binding Port VLAN 10
Software Version
DHCP Pool
Check EDIMAX Connection
Forwarding Port to EDIMAX
VLAN 30 Configution
VLAN 10 Configuration
Router Configuration
SSID Name
Site Survey
EDIMAX Configuration
Statistic
Live View
Pocera
Unstable
SMART 7.0 & Pocera
SMART 7.0
Summary Data Usage
Pocera Statistics
SMART 7.0
Historical Usage
Step : 1
Upgrade Firmware
Step : 2
Step : 3
ONT Log
ONT LOSi
ONT DOWi
ONT LOFi
OMCi LanLos
ONT LOAMi
Problem
Lossignal / ONT MAC address missing
ONT MAC address identifier
Detect ONT power
ONT not online
EMS
Bridge Mode
Disable DHCP
Disable WLAN
Enable Bridge Mode
Unlock MAC
AIS Router
- Set bridge mode at VLAN10 and bind an LAN port 1
- Disable DHCP
- Disable WLAN

SMART 7.0
- Enable bridge mode
- Unlock MAC address

Customer
- Inform username and password for PPPoE
- Connect LAN cable between AIS router at LAN port 1
and their router at WAN port

Bridge VLAN 10
and Binding Port 1
Fiber Home Cannot Remote
Management Enable
Version Upgrade
TR069 Enable
Presented by Chayanee Prateepsawangwong
Fibre To The Home
Edimax
1. Ping EDIMAX
2. Run Wizard
3. Switch Mode to Range Extender
4. Reset EDIMAX
Range Extender Mode
WISP Mode
Fibre To The Room
VOIP
2.4 GHz Status
5 GHz Status
Device Info.
FTTR with EDIMAX
Parameters
SIP Setup
On site
Full transcript