### Present Remotely

Send the link below via email or IM

• Invited audience members will follow you as you navigate and present
• People invited to a presentation do not need a Prezi account
• This link expires 10 minutes after you close the presentation

Do you really want to delete this prezi?

Neither you, nor the coeditors you shared it with will be able to recover it again.

# series-parallel circuit

No description
by

## Mhaya Dela Torre

on 13 October 2013

Report abuse

#### Transcript of series-parallel circuit

Series-Parallel
circuit

Technical terms
Current-The flow of charge is called the current and it is the rate at which electric charges pass through a conductor.
Dimly-  Emitting only a small amount of light
Load- The term 'load' refers to the power consumed by a circuit
Voltage- The electrical force or pressure that causes current to flow in a circuit.
A series-parallel circuit is used where it is necessary to provide different amounts of current and voltage from a single source of applied voltage.
in series circuit:
in parallel circuit:
in series-parallel circuit:
SAFETY PRECAUTIONS
 Remove all your jewelries while working in laboratory.
 Wear your proper laboratory clothes.
Avoid horse playing
Check the circuit connection before you switch on the power supply.
Use tools according to its proper usage.
 Make sure that your hand is not wet in doing electrical wiring.
 DO NOT TOUCH THE BACK PART OF THE TRAINOR'S BOARD.
acrylic board
wire
bulbs
bulb holder
connectors plug
binding post
STEPS:
step 1
prepare all the materials needed
step 2:
Connect the terminal 1 to the terminal of the bulb 1.

step 3:
Connect terminal 2 to the terminal of the bulb 2.
step 4:
Connect the terminal 1 to the terminal of the bulb 2.
step 5:
Connect terminal 2 to the terminal of the bulb 2.
step 6:
Connect the terminal 1 to the terminal of the bulb 3
step 7:
Connect terminal 2 to the terminal of the bulb 3.
step 8:
Connect terminal of the bulb 4 to the terminal of the bulb 5 .
step 9:
Connect the terminal 2 to the terminal of the bulb 5.
step 10:
Connect terminal 1 to the terminal of the switch.
step 11:
Connect it to the power source.
ACTIVITY TIME!
Follow- up assignment:
1. Design your own schematic diagram of series-parallel circuit on a bond paper
2. On your notebook, state the importance of of the combination circuit.