Loading presentation...

Present Remotely

Send the link below via email or IM

Copy

Present to your audience

Start remote presentation

  • Invited audience members will follow you as you navigate and present
  • People invited to a presentation do not need a Prezi account
  • This link expires 10 minutes after you close the presentation
  • A maximum of 30 users can follow your presentation
  • Learn more about this feature in our knowledge base article

Do you really want to delete this prezi?

Neither you, nor the coeditors you shared it with will be able to recover it again.

DeleteCancel

Make your likes visible on Facebook?

Connect your Facebook account to Prezi and let your likes appear on your timeline.
You can change this under Settings & Account at any time.

No, thanks

DonZ Device

No description
by

Utopia Now

on 29 September 2016

Comments (0)

Please log in to add your comment.

Report abuse

Transcript of DonZ Device

Tune as normal Tesla Coil
P1
http://www.classictesla.com/java/javatc/javatc.html
http://www.hvtesla.com/tuning.html
Tesla Coil Tuning
Reactor Schematic
Tuning
Electr. Schematic
Principals 2
Ferrite Ring
Adjusting Filter
50 hz Schematic
HV Schematic
12 Volt Schematic
Principals 1
http://www.produktinfo.conrad.com/datenblaetter/450000-474999/457046-da-01-ml-MAGNAT_EDITION_SPECIAL_TWO_de_en_fr.pdf
http://www.conrad.nl/ce/nl/product/457046/Magnat-Edition-Special-Two-eindversterker
Fabrice André doc 46Mb 81 page
http://www.tme.eu/en/details/tx42_26-3e25/ring-ferrites/ferroxcube/tx422613-3e25/
FERROXCUBE TX42/26/13-3E25 - Ferrite: toroidal; L:13mm; Int.dia:25.9mm; Out.diam:42.1mm
http://www.ferroxcube.com/prod/assets/tx422613.pdf
3C90 3E25 ?
3C90 or 3E25 ?
p 32
Skin Effect
p 29
19 mm
AL 9014 x 12
L1 50w doorsnede of opp 1,5 mm
p 27
3C90 0r 3E25
SR 193
http://www.overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/1515/#.UfFUlTXCS70
Zilano Schematics
http://nl.farnell.com/jsp/search/productdetail.jsp?sku=1784187&CMP=KNC-GNL-FNL-GEN-SKU-ROBOTICS&mckv=sUTqAuugN|pcrid|25462896157|kword|tx42%2F26%2F13-3c90|match|p|plid|
3C90 type
3E25 type
3E25
YouTube HD film: Refuge de Sarenne 1 minute 47s he says: "trois C quatre vingt dix" = 3C90
N30 material small Blue rings I all ready have
N30
Copper
Bar round
http://chomikuj.pl/DonaldKapanadze/Tariel+Kapanadze+i+Fabrice+Andre


http://www.salomons-metalen.nl/nl/producten/263/roodkoper/zuurstofvrij/rondstaf
Oxygen free Copper ?
20 mm also fits in the blue N30 ferrite rings
And looks the same as in the film
Shadow
Massif
Kilo per meter length
Caduceus Coil ?
Tuning
Litz cable High Freq.
Special Technique
180 opposite
o
Use the generator and try in resonance Tesla style
Get a first resonance automatic from L1 and L2
Bridge the spark gap and close switch 1 and 2
To get resonance at the frequency of the oscillator
by adjusting filter 2
switch 1
switch 2
at the terminals of output 2 And the same procedure for part 1
there is a third resonance automatic from L1 and L2 , diffrent from the first measured resonance
terminals
Page 1 fig 3
See the tuning part
20 or 25 mm
at the film at 2.50 he says with this thing we can adjust the resonance of L1 and L2
Earth Ground
The self cappacitance of the probe has a major effect on the measured frequency
The resonance frequency must not at all be disturbed .
Field
3C90
4300
N30
my blue ferrites
180 opposite
o
to HV Oscilator
Tesla
Donald L Smith
Tariel Kapanadze
Magnets ?
http://www.mvanderschans.nl/pdf-2011/Download%20afmetingen%20neodymium%20magneten.pdf
http://www.magnetenshop.nl/neodimium-magneten?page=2
different connections maybe ?
A1
A2
B1
B2
phase corr. filter between A1 and A2 or between B1 and B2
Phase correction
filter
I just guessed .. i don`t see this filter in the schematic from Fabr. but it is in the film.
DonZ devices
If you load L2, than the phase shifts some degree`s .. with cap and L you can correct it again to 180 degree opposite ?
experimenting
strange effects
very
P12
p 13
p 19
p 24
p 23
p 56
Don Smith by Dunfasto
Chubinidze Coil .
use litz wire for L1 coil. and for output and input use thicker wire for amps
see fabrice andre pdf also.
MAINTAIN RESONANCE BETWEEN L1 AND OUTPUT COIL. L2

DUNFASTO
Fabrice A. by Dunfasto

Quote:


Originally Posted by Utopia Now View Post

Dunfasto is the resonance between the red and the green coil 50Hz or in the 800kHz range somewhere.
And the HV module: do you mean with diode i guess or a flyback with built in diode .. so some kind of pulsed DC.

And thank for all the info
Utopia


hi utopia!

when 50 hz signal is fed into caduceus coil it just vanishes or quantifiled as scalar field so a cap is placed across 50 hz or in series with 50 hz and is resonant with primary red simple coil. which is a litz wire coil and is the longest coil single layered.

adjust copper tube. in this arrangement here are two copper individual tubes to tune resonance between red coil and green caduceus coil. and other copper tube to adjust 50 hz output.

u have to move copper tube in and out to fine tune resonance and output


dunfasto
for all

sample coil green does not effect the primary coil red .

green coil and blue coil are primary and secondary of a 50 hz transformer.

green coil is sample coil for work coil red in which high current is induced.

this high current is fed to blue output coil through induction through ferrite core.

the blue coil gets high current 50 hz output.

earth current infuses charges through copper coil and compensates for the losses and fed through ferrite to red and green coil.


Akula 0083



first try resonanting primary red coil in kilo hertz range without a cap on 50 hz modulator input. adjust copper tube adjusting resonance in primary coil by sliding in and out copper tube. when its resonating you will get a signal on scope as horizontal 8 that is 00 on scope. now check 50 hz caduceus having same resonance signal as horizontal 8 on scope this means both r resonating individually. then adjust copper tube at the output side and connect a lamp and adjust for max brightness


SR 193
tip: fabrice andre and sr 193 have similar working principle the only difference is in coiling and copper pipe which sr 193 did not use thats why he had less outputs only 150 watt bulb but it was self running and overunity. where as fabrice andre used copper pipe and he got 2 kwatt approx.


measure L1 that is caduceus coil inductance with lcr meter and find a suitable cap to oscillate at a frequency in khz range.

then measure the output coil with lcr meter and adjust the cap of suitable pf or uf to have resonance between primary caduceus and output coil.

try this

dunfasto
Dally 2012 nanopulser
remember in any free energy device one coil is bifilar(not tesla bifilar thats additive but subtractive or resistive) or caduceus or self cancelling magnetic field. other is modulator coil(simple coil) and other is output coil(simple coil) resonance has to be maintained between either output coil or modulator coil with respect to magnetic filed cancellation coil. this coil that is caduceus or resistive bifilar is fed spark with capacitors. and remember mainatain resonance. the last important piece is of metal tube. so we have 3 coils and one simgle turn coil of metal tube which is used to fine tune resonance.
Hendershot
all coils are wound clock wise same direction as inductive coils.

use litz wire for L1 coil. and for output and input use thicker wire for amps
see fabrice andre pdf also.
MAINTAIN RESONANCE BETWEEN L1 AND OUTPUT COIL. L2
REGARDING YOUR QUESTIONS FABRICE ANDRE

L1 coil is of litz wire filo litz is italian company making that wire which has no skin effect. you can use any litz wire. its simple coil to which spark is connected
L2 coil is caduceus coil thru which 50 hz signal is induced
L3 coil is simple coil for output
L4 is single turn copper tube. you can try alluminium also

every coil one end is connected to earth

yes ferrite rings make difference in tunning. high permeability ferrite helps in faster tuning.

the ferrites must be placed at three places of 3 rings as two sets at the ends of tube and one set in the middle of tube on which coils are wound

000 000 000


yes L1 coil must be resonant with L2(caduceus)

connect pf capacitors hv like chubinidze to your Hv + and cold ened to earth So L1 is oscillating. Adjust L4 that is copper tube to tune L1 to L2.

magnets are used to get resonance in a quick way otherwise it will take time for you to find the sweet spot.

try filter caps at output to test the energy generation otherwise not needed in output.




dunfasto
Re-edited version .. thank you Dunfasto
http://www.energeticforum.com/renewable-energy/8804-3d-electromagnetic-field-4.html#post153681
Bifilar
Caduceus
Don Smith Device 1996 Tesla Symposium (18 of 19) starting at 1 minute 10sec.
Caduceus
http://www.energeticforum.com/renewable-energy/4864-donald-smith-devices-too-good-true-330.html#post238601
hi utopia!

wind the coil as you would normally do. wind clockwise from left to right--->
make every second turn overlap first turn so you have two notches of overlap 180 degrees apart like this <o> wher 0 is coil bobbin and < , > are notches formed by overlapping coil. so you will have one terminal of coil at left and another one at right when you finish coiling. this coil is caduceus but wound differently. this is resistive coil.
at first notches wont appear 180 degrees apart but dont worry keep winding and when you finished the winding entire bobbin then adjust notches manually.

dunfasto

Originally Posted by Waves View Post

CosmoLV Amplifying Coil - YouTube

hi waves!

the video shows the method of winding in good way. but notches are on one side only.

where as the notches must appear on both sides 180 degrees apart. and a single wire must be used.

if one want to make two layered caduceus coil then first wind single layered caduceus from left to right then cover first layer with paper hard enough to bear the second wind. the second wind must start from the place where one started winding first layer. and notches of first layer must coinside with the second layer.

only single wire must be used.

dunfasto
schematic 4
C1
42kHz and 50kHz test
94 nF
68 nF
Schematic 5
hi utopia!

make coils slidable. strong spark not needed. use copper tube and ferrite rings then run the setup. resonant frequency will change after ferrite rings and copper tube inserted. the turns for output is done by measuring voltage and no of turns can be increased to get desired voltage. you have to do trial and error method to get the device running properly so dont get disheartened when things don`t go your way. a lot of tinkering required to achieve the desired output.


output and modulation coil

wound in two or more layers winding cw only from left to right(first layer) then right to left (2nd layer) primary caduceus is single layer only.

dunfasto
http://www.supermagnete.nl/FE-R-40-22-09
the circuit is correct. and if you want to eat mangoes without worrying where the mango trees are then just follow the circuit.

nobody understands the free energy circuit which is self run and just need a kick start or jump start whatever you want to call that.

energy comes from resonance of 50 hz.

how to do it ? here is the recipe

make a 50 hz generator.
make another generator of 30-40 khz(flyback)
make a power supply of 12 volt 100 hz pulsating dc.(fwbr)
modulate power supply with 50 hz ac in series with 12 v ac before fwbr power supply lower than 220 volt ac and mix with 12 volt ac power supply in series as done by sr 193 hand drawn circuit. this pulsating 100 hz power supply is fed to 50 generator and flyback driver.

result you will have a carrier of 30-40 khz with modulation frequency of 100 hz. when this 100 hz interacts with 50 hz frequency automatic resonance happens in the coil setup and the output will be in phase (current and voltage) and the signal would be amplified sine wave.
akula did same but mixed tiger yoke instead of sr 193 spark and used 220 volt pulsed dc supply with 12 volt dc supply.
see figure and wind coils this way. wind 320 turn coil inside in two layer of 80 turn each. the blue and yellow outer coils are 80 turns also. since we are not using any 50 hz modulator for modulation the output will be high frequency so we have to use ferrite cored 220v to 12 volt gate driver transformer.

we are just using the high frequency resonance between thick copper coil with 320 turns central inductor inside alluminium tube. for resonance either slide in and out the alluminium tube or slide the 320 (4x80 turns) turn coil module. all coils are wound anticlockwise. if you dont follow the winding dots for start of the wind the circuit wont run and you will not have output.

ps: give special attention to the winding of the flyback invertor driver its different than what are used on homemade inveror windings that ususally come in 12-0-12 or 9-09 transformers. the flyback driver coils as shown in the figure below is the basic overunity coil configuration. so here in chubinidze we have two steps overunity one at flyback driver stage and another at 320 turns(4x80 turns) coil module inside alluminium split tube. which gives addded boost due to resonance.


00
00 thanks for this info.
Regarding the flyback driver coils what did you mean that it's different from inverter drivers? cause mine I did 12T 0 12T to mine.
Should I do this in another way?
Thanks

hi guruji!

see image and check the difference
http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/msg370541/#msg370541

Quote:


Originally Posted by mr.clean View Post

hi there good effort on the diagram, few questions...
-how does the 50hz amp differ from the 50hz oscillator?
-is there a slit in the copper tube, would it act like a shorted turn or its ok?
-is the output coil wound opposite? it looks like dots are showing that, but written all coils same direction.
-is there a thick primary? looks like copper is primary and to high turns coil.
-are there any shorted resonant LC?
-is the caduceus coil single layer?

sorry for all the questions, and cant help to wonder, have you built this? how can you know it works?
i DO want it to work, just curious

hi mr. clean!

-how does the 50hz amp differ from the 50hz oscillator?
oscillator produces just 5 volt or less output and we need like 20 volts for that amplifier is used

-is there a slit in the copper tube, would it act like a shorted turn or its ok?
its solid copper tube no slit.

the tube is solid in case of fabrice andre but for chubinidze its split alluminium tube

-is the output coil wound opposite? it looks like dots are showing that, but written all coils same direction.

yes the output coil is wound opposite in fab andre

-is there a thick primary? looks like copper is primary and to high turns coil.

in case of chubinidze thick copper primary tube wher as in fab andre its litz wire coil thin primary.-

are there any shorted resonant LC?

no there are no shorted resonant LC

-is the caduceus coil single layer?

caduceus coil is not single layer ist multilayer. caduceus coil= cw +ccw coil= orthogonal coil multilayer. see the image i just posted of orthogonal coil.


dunfasto
hi utopia!
thanks for your efforts!

check this out! do it yourself thing! make sure you connect hot end of 12 volt ac of transformer to first diode.

kapanadze effect in bulb!


Kapanadze first and second filter are diodes ?
Kapanadze
for overunity we need interations of orthogonal coils as akula or sr193 or fabrice andre. dunfasto
or interactions ?
Pulsed DC HV HF
Pulsed DC HV via Avramenko Plug
HV HF AC
CW CCW
functions as Diode
Radiant with 50Hz => Overunity
when we modulate hf rf with low audio frequency it results in two bands of opposite phase the resultant energy tapped by coil is zero unless we use a diode to get original signal of the audio rejecting one half of the band and using one half of the band. akula does not use diode use a coil to interact with modulated rf dual band with the orthogonal coil. here amplification takes place and output coil fetches the amplified output.

have you seen any diode in the air coil output modules in any akula schematics?

try to read info about AM radio modulation

but the little secret of the devices having overunity is interaction of resonance or aircore interaction of high voltage(very low current) with environment( radiant energy) and its reception(output coil) the output coil must be resistive only not having inductance properties.

so simple rule becomes Hv+hf + spark discharge---> radiant event caduceus coil or cw+ccw coil for output.

and if you have ac hv hf then primary coil must be cw+ccw or caduceus and recepter coil or output coil must be same. since we are dealing with radiant event which is opposite to our normal inductance filled electricity. we must receive output in the same way using inductance less coil.

Caduceus
Sparkless Devices ( Akula, Andriej )
for a sparkless device like akula you have to use two generators one for high frequency and one for 50 hz. the high frequency is modulated by 50 hz creating dual band like when we modulate the radio carrier wave of high frequency with audio to be transmitted over wireless waves. this create two bands so resultant energy is zero. we create resonance between high frequency modulated wave and looped capacitor coil oscillating self oscillating at 1/4 wavelength of modulated high frequency which transfers impulses to the 50 hz orthogonal coil the orthogonal coil recieves the amplified output and is transferred to the output coil.

there are two variants of kapanadze one is spark oriented that uses radiant and ground energy. example sr193, fabrice andre

other is sparkless version that uses yoke from old black and white tv's and uses resonance
example akula, andriej,

original kapanadze uses sparkless and spark version with resonance.

first get to the depth of akula circuit and understand. you need to study more when you get the grasp then you can replicate it.

dunfasto
a
if you want to light one bulb like sr193 or chubinidze then one can charge cap and use just 100 or 200 watts. but if one desires higher wattage output then one has to use inverter transformer like kapanadze, akula and fabrice andre.

one can use cascading to have outputs in kilowatts and megawatts

kapanadze use cascading but basis is basic chubinidze circuit and sr 193 is modified kapanadze circuit .

those who wish to understand kapanadze must understand chubinidze circuit which is basic stepper circuit for overunity

dunfasto
fabrice andre used caduceus coil.

dont get confused with cw ccw coils.

cw coil has NS poles

cw ccw coils have either NSSN poles or SNNS
similar poles facing each other acts as caduceus cross over or nodes.

for overunity one coil must be cw+ccw or caduceus(the better) which create electron avalanche. other coil is cw which is output coil.

electron avalanche can be produced by either 50 hz or high frequency +high voltage AC or pulsed dc but the coil must be cw+ccw or caduceus.

suppose we want 50 hz as output then fab andre long litz coil must be caduceus and modulator coil must be cw coil and so is output coil(cw).

and suppose we have high frequency hv ac in long litz wire coil then modulator coil must caduceus and output coil must be cw.

one coil must be caduceus then modulator cw and vice versa.

one coil must produce electron avalanche.

when using cw+ccw coil then there must be a gap where the joint is so ferrite core are arranged as 00000 gap 0000

when using caduceus coil as primary hv ac or pulsed dc( cap charged spark gap like chubinidze) the ferrites must be arranged as continuous tube like this 000000000000 over which caduceus coil is wound as primary. and over caduceus coil wound modulator coil and output coil.

case dally: the RG58 coaxial cable is cw+ccw(magnetic cancellation coil) which produces electron avalanche

case akula: 50 hz coil wound as cw ccw in two layers produce electron avalanche.

case sr 193: he used jointed cw+ccw

case chubinidze : he used caduceus coil(resonator)

fabrice andre used caduceus coil

NOTE:

1. WHEN USING PULSED HV DC TO FEED PRIMARY CADUCEUS there is no need to modulate it with 50 hz in oscillator of high frequency.
2. when using high voltage high frequency Ac feed to caduceus then the modulatore coil(50 hz) must also modulate the high frequency oscillator by winding few turns say ten turns on ferrite core of flyback along with the oscillator coil fed by transsistor. 50 hz live wire from generator of 50 hz(amplified) wire-----------ten turns hv ferrite------modulator coil(cw wound over caduceus)-------to neutral or cold of 50 hz.

dunfasto

50 HZ
Electron Avalanche
ferrite cores with gap : 00000 0000
ferrite cores : 000000000000
HV
L1 Primary
L2 output
L3 50 Hz Mod Coil
Fabr. A
Caduceus
Long Litz Wire coil
cw
one coil must produce :
electron avalanche can be produced by either 50 hz or high frequency +high voltage AC or pulsed dc but the coil must be cw+ccw or caduceus.
cw
cw
Dally ; RG58 Coax = cw + ccw
SR 193: he used jointed cw+ccw
Chubinidze : he used Caduceus coil(resonator)
Fabrice André used Caduceus coil
NOTE:

1. WHEN USING PULSED HV DC TO FEED PRIMARY CADUCEUS there is no need to modulate it with 50 hz in oscillator of high frequency.
2. when using high voltage high frequency Ac feed to caduceus then the modulatore coil(50 hz) must also modulate the high frequency oscillator by winding few turns say ten turns on ferrite core of flyback along with the oscillator coil fed by transsistor. 50 hz live wire from generator of 50 hz(amplified) wire-----------ten turns hv ferrite------modulator coil(cw wound over caduceus)-------to neutral or cold of 50 hz.

some pictures
http://www.teslasociety.ch/info/handwerker/colde.pdf
and 50 hz modulation can be done by cw+ccw coil or caduceus coz we are not dealing with normal electricity here so modulation need same form of of inductance less coil.

50 hz can be implemented by using relay which vibrates at 50 hz. using suitable caps. acting like a flasher circuit used in bikes or cars in early era.

so the primary coil functions at 50 hz (though internal frequency of primary is in khz) so that spark frequency becomes 50 hz.

but main aim is to reduce current in primary.

but when we have hf ac like tesla coil we need it to convert to radiant positive energy without a diode then primary becomes cw+ccw or caduceus
cancelling magnetic properties or indctive properties although not completely coz partial ripple remains like in hvdc using diode(current in low ma)
so primary coil is having either cw or ccw but positive radiant energy.

the secondary coil is opposit phase of primary and another coil is in opposite phase of secondary or in phase with primary. so combination becomes

primary say cw
then secondary ccw
tertiary coil again ccw but wound ___0000___gap______0000___

the secondary and tertiary coils are joined forming cw+ccw combination and becomes receptor coil whose one end is earthed.

this is basic arrangement for ou
Red
Serg. V
This schematic work. It's RED final schematic. If you want self-runner connect an output 1:1 transformer 220v:220v and give the power to inverter. This will do self-looping the system.

Main GOAL here and in yours 99.99% failure experiments is WHAT ??

NON-CURRENT EXCITATION OF INDUCTOR - TESLA INDUCTOR !!

IF YOU UNDERSTAND THIS YOU COULD REPLICATE ALMOST ALL TESLA EXPERIMENTS ?? NON-CURRENT EXCITATION IS A GOLDEN WORD !!
STATIC FIELD WORK HERE. STATIC MIXED WITH AC. EXCLUDE ANY HIGH VOLTAGE HIGH FREQUENCY OSCILLATIONS AND YOU WILL CACTH IT !! THE EFFECT !!

HOW TO UNDERSTAND IT??

LOOK CAREFULLY AT THE SPARK GAPS. YOU NEED TESLA TYPE SPARK GAPS TO EXECUTE NON-CURRENT EXCITATION OF INDUCTOR (TESLA PRIMARY).

JUST TWO VERY SIMILAR WORDS BUT THEY ARE DIFFERNET LIKE A SKY AND THE EARTH.

1. interrupter

2. contactor

At the fist glance both are the same BUT .... they are not !!

you need here "interrupter", also in all Tesa replication experiments you need "interrupter" not ordinary spark gap contactor like all do.

FIND TESLA PATENT AND STUDY HIS MECHANICAL CIRCUIT CONTROLLER !! HE TOLD US EVERYTHING BUT WE HAVE FAILED TO SEEN THE TRUTH !!

Wire diameter, number of turns are not critical. windings need to be phased exactly like Tesla said and shown. Inner coil is wide copper ribbon but you can use here high diameter wire. There is nothing inside Rose tube. Just air !!

http://www.energeticforum.com/renewable-energy/7870-possible-working-principle-don-smiths-device.html
1/4 wl. When the coil resonates it does so at nodes of a wave. It can also be 1/2, 1/1 of wavelenght. It depends on frequency of the discharges assuming that the disturbance travels at the speed of light. In short. The lenght of the secondary coil should be as close as possible to the 1/4 wl to resonate at highest possible q.
Just thoughts
http://tarielkapanadze.ru/Kapanadze2005eng.htm
Free Energy Selfrunning Device from ikako chubinidze Youtube
replica Chubinidze ? type in youtube:
second part in same video !
yes its capacitor in the tin box. kapanadze source can be understood by replications of chubinidze and replication done by RED. input is done by inverter type oscillator using two transistors. there are two ways one is using pulsed dc spark and other is alternating hv ac spark. the spark can be avoided by using igbts switching back and forth as done by akula. but much protection is required in sparkless version as they blow up due to back emf pulses. these are called radiant spikes and can be had with a coil inside the pulsed tube. the magic is that when we pulse with hv dc spark from outside coil of thick copper wire as shown in kapanadze setup the coil inside that copper coil exhibits alternating current. one from inductive effect and other from back emf so we have ac in the inside coil. more coils wound coil inside a coil will give more output.


radiant energy is quite reverse from our hot electricity.
wot we call high resistance becomes low resistance for radiant
we need core for hot electricity radiant dont need core
thick wire low resistance in hot one where as thin wire low resistance in radiant.

people dont understand this thats why they fail in replications.

find out more on earth energy from ground as shown by kdkinen. ground response is same as radiant spikes.

resonance works here also in kapanadze and its not between primary and secondary its between back emf and ground and spark just keeps this process running. energy comes from back emf and ground energy. spark just play as catalyst and must not decay else no resonance between ground and back emf in coils.

and without ground you wont get power.

00 :)
?
Stochastic Resonance ?
https://en.wikipedia.org/wiki/Stochastic_resonance
http://tesla3.com/free_websites/zpe_hendershot.html
Hi cumpood

Yes you have small output power of HV transformer. You need to build stonger HV source and while experimenting try to change HV poles at your primary {inductor}. Swap them than make experiments, than swap again and make more experiments.

Also as i have seen your Earth-Ground conductor {out of building} is not good. It's too rusty. Best you can is to clean end of Earth-Ground conductor and weld some good massive conductor and take ground in your home.

About distance Yellow coil from your Primary {inductor} just like Tesla said. There must not be too strong mutual coupling between primary and secondary.

Try to make as RED did in his device. {i think on position}.

RED device - image of inductor;
Serge V
http://www.energeticforum.com/242797-post10301.html
change HV poles
Triode like ...
current is produced by moving a solenoid of soft iron between permanent magnet poles. where magnetic field is perpendicular to the moving iron solenoid.

where magnetic field acts as stationary field and the moving solenoid acts as oscillator(SHM= simple harmonic motion) which produces current due to induction law.

the same applies to overunity devices. we have oscillator with primary oscillating a secondary Lc earthed loop. which acts as solenoid and is oscillating in a stationary electric field produced by either cw+ccw or caduceus coil. the interaction of electric and oscillating magnetic field generates another quasi electromagnetic field which is tapped by third simple coil. whose one end is earthed and rectified output is taken. extra energy comes from the ions that travel from earth ground to the output through the Lc earthed coil and are constantly returned to earth in the output side. the energy never stops as ions come from ground and pumped up and returned to the ground after being used.

carefully see circuit of dally and you will find the method described above.

end of text

00
http://www.liveinternet.ru/users/edward_lee/post237839624/
http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/#.Ur9kjDVgW70
Tune with Earth ground connection attached.
Gets tuned with help of TL generator when tinkering with frequency and duty cycle.
http://www.resonantfractals.org/PCC/Hendershot.html
English Schematic
Ruslan Circuit
Version a
version b
http://realstrannik.ru/forum/39-kapanadze/134930-ustanovka-ruslana-kulabuxova.html
Wesley Stive P1 video channel
http://www.youtube.com/channel/UC1ZrGlkxBvG9WOwIs2eApLA
Akula
Dally
a tesla coil is a high voltage coil at the top and ampere at the bottom that is ground. if we want to take output from tesla coil we must reduce voltage and that is done by reverse direction coiling so as to maintain 220 volt output. do it any way in any layer.

moreover since the whopping hv pulses also increase the voltage of the final 3rd coil tesla coil it adds more voltage so reverse direction coiling helps.


00
you can find the video`s on YouTube
De-Modulation
the rf band contains dual band and when rectified still gives one ac waveform. radios do this by single half wave rectifier. to keep one band with modulation audio intact and filter the rf waveform so we hear sound in a reciever of the radio.

yes the voltage must be 220/110 volt depending on the country in the output of 3rd coil.


the circuit stage is correct and is valid. the output is ac even after full wave rectification!

this is fed to the smps ac inlet and 12 v dc is fed to the input to replace battery for feed back.

00
Don Smith Basic Schematic
HF
LF
Modulated HF
LF 50 Hz
LF 50 Hz
with 50 Hz Modulated HF
HF
LF
T1
Modulation
50 Hz
http://www.radio-electronics.com/info/rf-technology-design/am-reception/diode-detector-demodulator.php
0 0
HF: kHz or MHz range
Many translated video`s by Wesly from many inventors
You can click on the link to go to the youtube channel from wesley
http://www.youtube.com/channel/UC0tu2-2OJCrmbdyGYzui6jw
Click on the link for many Donald L Smith films
http://www.youtube.com/channel/UC0tu2-2OJCrmbdyGYzui6jw
HF
LF
Radio frequency
audio frequency
50 Hz
LF
50 Hz LC
resonance ?
L
C
C
4 requirements for ou

1. hf oscillator(AC)= kacher(first generator)
2. spark (electrostatics+magnetics) hf dc dioded kacher can be used(2nd generator) those who want to avoid spark can feed the hf dc to coaxial cable shorted at other end
3. output coil design must be cw+ccw
4. ferrite rings or ferrite rod bundle core

00

The resonator 1/4 lambda of hf, it is not necessary? ( question from Corry )


frequency resonance can be adjusted by moving ferrite core. or using a split copper tube inside ferrite rings or if you are using ferrite rod bundle core then place the ferrite bundle core inside copper split tube

00
Think about how a basic SG tesla coil works.. ;)

In any case," Impulse in circuits is the key of concentration and to reach resonance with it
When you see a Inverter work, that makes 12Vdc from car battery to 120Vac or 220Vac 50/60hz, have you ever wondered why to voltage never really dropped when measuring? because of Impulse (=.
Cheerz~

Impulses have to be achieved and made, otherwise you can't manage to make selfrunners.
not by using HF Oscillations. You need an output where the voltage is constant and not dropping and using up the amps.
Look at an ordinary Inverter, 12V to 120V. with X watts. ask your self why the voltage doesn't drop when you connect load and want to measure :). think.
In there the answer lies and in many other things to realize what is missing.

Ferrite is what is needed by Heater circuits ( HF HV Oscillations) like that for Resonance. By Impulses It's a different story.

A very simple way to understand Impulse Technology is to understand and see how a Spark Gap of a Tesla Coil works.
Every arc at the spark gap creates a pulsed magnetic field that excites the Coil,
That expands and contracts. It beats. Spring and Trapping.

Leal and Barbosa knew something about this also , that is what they are using, Impulse.

The Tesla Coil is the basic Knowledge of understanding all of these OU devices and Self running.
Impulse is the answer.

Remember my TROS (Igor replication ) circuit that uses a Transistor on youtube? that also uses ground?
That is Impulse.

Hint, Radio Towers need good Ground to operate. Otherwise they won't.

I hope these Tips can open up to the understanding .

cheerz
Akula Latern
GeoFusion
Do you mean that you are using this schematic
More Latern Like small ......
http://realstrannik.ru/forum/49-teoriya-andersena/28770-naglyadnyj-effekt-se.html?start=864#212027
http://www.esdsite.nl/elektronica/kleurcode0.html
The world famous Tesla system, and what he did.
Necessary primary and secondary coils. Primary pulse is applied to the primary coil.
And here arises the electromagnetic pulse is transmitted to the secondary coil.
Resonance occurs, and the secondary coil begins to receive energy from the space.
http://tarielkapanadze.ru/Kapanadze2005eng.htm
between primary and secondary coils
Resonator inside is the Secret Tariel says
http://www.loneoceans.com/labs/sstc2/
http://www.daycounter.com/Calculators/LC-Resonance-Calculator.phtml
http://www.66pacific.com/calculators/coil_calc.aspx
http://www.liveinternet.ru/users/edward_lee/post237839624/
7kHz ?
UF4007 ?
http://www.overunity.com/14610/akula0083-light-no3-dual-tl494/#.U9IUFGflrRZ
JohnBlade Thread on Overunity.com
MrPreva on Youtube
http://www.youtube.com/channel/UC0tu2-2OJCrmbdyGYzui6jw/videos
Probably from a schematic from LaserSabre .. maybe OverUnity
Enternal lanter 4. English translation in letters.
Akula0083 - Myth of Nano Secacah - Demonstration
http://www.rexresearch.com/smithdon/DonSmith.pdf
From Don`s Library
Maybe this is a Fake one
Eternal lantern No.4 = AKULA0083
Zilano
http://www.ekswai.com/en_lc.htm
LC resonance online calculator
Light 1
Light 2
In resonance light 1 is dim (off) and light 2 is bright (on).
NPN 125 watt 100 volt 10 A
http://192.211.49.220/-%20Free%20Energy/Tariel%20Kapanadze%20Replicas/Fabrice%20Andre%202kW/oe%20team%20deploy/

http://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg366037/#msg366037
480p no subtitles
Tariel Kapanadze FULL VIDEO invented a 5 kilowatt free energy generator
Secondary Primary
HV pulsed DC
Evidence that Tesla knew that the coils could be wound for Ampèrage
If you wind a Tesla coil different than you can get Ampèrage instead of Voltage ... or both :)
Reverse Direction
Z is from Zilano :)
Enjoykin Tips and Tricks
AKULA TIPS and TRICKS

1. Find Free resoance of your coil. Free end in air. Search for maximum amplitude on your coil. His 1.0083MHz
2. Connect Working ground on Free end and search for Resonance - Maximum Peak Amplitude. His 4.88MHz. Use Separate Ground for coil. Another ground for Oscilloscope, Spectral Analyser and Signal Generator.
3. Search lower common multiple of Ground Resonance 4.88MHz. There are many. His is 1.842MHz. Amlitude is lower and very hard detect - because there are many common multiples (Earth harmonics) in signal. Resonance is very-very sharp. Need carefully and slowly mannual sweep. Once you change Ground conductor lenght - everything you have found will be changed. Search again for new ground lenght.
4. On that resonant frequency of Ground response 1.842MHz make working TT (Tesla Transformer or Katcher) without connected bifilar-choke or antenna.

https://www.youtube.com/channel/UC2aHNMDJzRW7YDd145_Pa2w/videos
and T 1000 :)
Hi T-1000. Ok, from what I recall I don't think that Leedskalnin mentioned using one turn to go back to
the starting point and then continue winding from there, but it shouldn't really matter much.

It matters a lot. :)

When winding electromagnet on conventional method each layer North/South is facing second layer South/North which effectively lower magnetic field strength outside of the coil. The strongest magnetic field is inside of coil.
When each layer North/South is facing second layer North/South you get same effect as two magnets forced with same poles. This results magnetic field concentrated on center outside of coil and is strongest there. This is same effect as optic lenses are doing...


P.S> The most logic reason why we want to have strongest magnetic field on scalar grenade coil 1/4 and 1/2 halves is what makes electricity - the magnetic field from inductor and the electric field from antenna leading from Tesla coil.. Like vice versa when we have electric field and magnetic field on the wire when there is current.

Does anyone have a clear idea how Ruslan wound his bifilar coil. Is it wind first layer, then return to start for second layer or a conventional front-to-back and then back-to-front? Also, is it wound opposite to antenna (CCW)?




Tesla bifilar coil (inductor on grenade) and grounding condcutor should be exactly same lenght as grenade (including 3 turns on Горшок) or 2 x 18.75m = 37.5m.

You need measure coefficientof shortening Kукр. with oscilloscope. Typical value for copper conductor is 0.8. It means speed of EM transversal wave in conductor is exaclty 0.8 x C (speed of light) smaller than speed in free space.

But - for Scalar-waves it is not correct. Speed of scalar waves is in our case (1/0.8)2 times C or 1.5625 faster than transversal EM- wave which was confiermed personaly by Great Nikola Tesla - many times. In simple words EM-wave have time lag about П/2. We need Scalar-wave timing not EM-wave . :)

Sergkik
https://www.youtube.com/user/Sergkik/videos
and more :)
Fabrice André
Urfa Sanli .. Ibrahim Cicek
https://www.youtube.com/channel/UChIbi3zJRgVevvZK1K-Wc_w/videos
Interesting
Phase change 180 degree opposite !
at 7 minute 7
https://www.youtube.com/user/Prostoslojnom/videos
http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/msg422755/#msg422755
Tuning Urfa :)

Really I want to describe to you my tuning process but My english is not enough for I can describe it . Let me briefly in shortly explain: For tuning of process I am using pot of the push-pull generator and pot of the kacher and

especially the length of the inductor(on granade coil) wire and the length of the TV yoke wire(especially 3Turn on yoke).

And I observe the results of changes made. I hope you understand what I say. :)






Caduceus coil
http://www.deepfriedneon.com/tesla_frame6.html
https://www.conrad.nl/nl/voltcraft-functie-generator-123113.html
anandml
Full Member Posts: 107

Re: Kapanadze Cousin - DALLY FREE ENERGY « Reply #2128 on: July 23, 2013, 07:56:28 AM »

From Сергей В. post
http://www.overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/new/#new
Only for Experimenters

Гость УСТАНОВКА 2 kwatts on 220V


Author (not ikako chubinidze) achieved 2kWatt output power with 100watts input.

Use Nanoperm stripes 2cm = about 0.78 inch wide.
Master ТДКС oscillator (HV-TV transformer with built in HV diode(s)) must be very stable and thermally compensated. Any industrial ШИИ (PCM) will be good here. Also you can use master oscillator based on microcontrollers and high speed mosfet drivers. For isolation use GDT gate drive transformers. Optics is too slow here. Schematics can be found on internet.

This circuit need very fine tuning and very sensitive is to pulse-with and Cкважность parameters.
Cкважность is our Russian term and means pulse period-to-pulse duration ratio or relative pulse duration.

S=1/D
D= duty cycle.

Use Aviation aluminium for tube. Diamtere 5 cm - 2inches. Bifilar was wounded in counter-plan. 1/2 half righ direction - other 1/2 left on whole lenght. Output power also depend from distance between Nanoperm windings. Tune it between 1-2.5 mm and keep the distance step constant. Use good Earth grounding. Heavy cooper bars deep in wet soil and check earth conductor with compass !!

Удачи !!
Spark Gap Frequency ?
Resonator
Inductor
Ground
Turns
Blue winding
Yellow winding
as blue winding aquuarium 2012
Wound Bifilar
aluminium cut pipe or loop aluminium
Resonator is required
Need to find out how
http://www.next.gr/power-supplies/Inverters/Power-inverter-l13408.html
?
http://www.next.gr/power-supplies/Inverters/
Гениратор свободной энергии! Free energy generator .
An other one ...
http://www.richieburnett.co.uk/dcresist.html
DC Tesla coil design
http://www.ninicninic.com/sm/are-there-nikola-tesla-s-non-hertzian-waves/121
Tesla Scalar
i mean to say when we have pure voltage and low current then we have radiant energy and you can light a fluoro placing it near tesla coil. so when we have high voltage and and low current its same as radiant energy but its oscillating plus and minus so we use diode and create positive radiant energy.

so primary coil is having either cw or ccw but positive radiant energy.

the secondary coil is opposit phase of primary and another coil is in opposite phase of secondary or in phase with primary. so combination becomes

primary say cw
then secondary ccw
tertiary coil again ccw but wound ___0000___gap______0000___

the secondary and tertiary coils are joined forming cw+ccw combination and becomes receptor coil whose one end is earthed.

this is basic arrangement for ou

but when we have hf ac like tesla coil we need it to convert to radiant positive energy without a diode then primary becomes cw+ccw or caduceus
cancelling magnetic properties or indctive properties although not completely coz partial ripple remains like in hvdc using diode(current in low ma)

but main aim is to reduce current in primary.

and 50 hz modulation can be done by cw+ccw coil or caduceus coz we are not dealing with normal electricity here so modulation need same form of of inductance less coil.

50 hz can be implemented by using relay which vibrates at 50 hz. using suitable caps. acting like a flasher circuit used in bikes or cars in early era.

so the primary coil functions at 50 hz (thogh internal frequency of primary is in khz) so that sapark frequency becomes 50 hz.

the output of this kind of setup is different from hot electricity we use normally and can be used to run inductive loads and resistive loads. for generation of hot electricity this energy can run a normal generator and we can have free power suitable for domestic electronic appliances.

since energy produced in air core coil or ferrite is radiant which can damage sensitive electronic equipment o it must be enclosed in a lead box.


dunfasto
L3 mod
L2 output
L1
Caduceus
L2 output
L3 mod
50 Hz
The cilinder of copper also plays the role of condensator, and
at the same time receives a mountain unlimmited of charged parts coming from our Earth(ground)
Coil L1 and L2 have a resoanance frequency
You have to find the way that L1 and L2 are at automatic resonance
and in opposition 180 degrees ...
for that reason L1 is ... wound in "caduceus" ( special way of winding a coil )
The resultant of the 2 frequencies give birth to a wave longitudinal
and we have a third coil that is to receive the 50Hz modulation
copper cilinder
We have a coil L1 wound on a cilinder from PVC o 50mm
lenghth about 14 cm with ferrite in it (3C90 probably)
we have a second coil L2
the amperage must be ...
spark gap
Earth Ground
p 19
L3 mod
L2 output
L1
Caduceus
Use the generator and try in resonance Tesla style
Get a first resonance automatic from L1 and L2
Bridge the spark gap and close switch 1 and 2
To get resonance at the frequency of the oscillator
by adjusting filter 2
switch 1
switch 2
at the terminals of output 2 And the same procedure for part 1
there is a third resonance automatic from L1 and L2 , diffrent from the first measured resonance
terminals
The self cappacitance of the probe has a major effect on the measured frequency
p 24
#209: Basics of Phase Dots on Transformer Windings
Transformers, basic phasing
You could do some experimental research and give people here replacement for hardly tunable Katcher hardware introducing yourself precise adjustable solid state KICK-DRIVER based on Pack of Drift Step Recovery Diodes. For pure Katcher replacement it need to give variable nonosecond pulse durations, sharp slopes timings and very high voltage amplitudes 30-60kV with high peak powers for accelarating conduction electron currents in Grenade.

Main KICK DRIVER rule : Must be simple to build and simple to adjust !!

I think main problem to all is making clean HV unipolar impulse/s with precise kick times (bursts timing).


Удачного дня !!
До встречи.
Enjoykin

http://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg492686/#msg492686
Full transcript