Send the link below via email or IMCopy
Present to your audienceStart remote presentation
- Invited audience members will follow you as you navigate and present
- People invited to a presentation do not need a Prezi account
- This link expires 10 minutes after you close the presentation
- A maximum of 30 users can follow your presentation
- Learn more about this feature in our knowledge base article
Laser Scanning Oil & Gas
Transcript of Laser Scanning Oil & Gas
Camera like instrument which uses a laser beam to measure distance
Fires laser and for each point the laser hits it records an xyz value.
As well as recording distance it records the reflectivity of a surface which gives an intensity value.
Some scanners have inbuilts camera which takes photos,
These are used to add colour (RGB) values. How does it work ? Fast data collection What do you get? POINT CLOUDS Advantages VERY FAST DATA COLLECTION
• VERY ACCURATE
• VISUAL 3D RESULTS
• SAFE ACCESS HIGH/RESTRICTED AREAS
• LOTS OF DELIVERABLES
• NOTHING MISSED Multiple Setups Deliverables Pointcloud Asset Management Deliverables Webshare / TruView Deliverables Intelligent 3D Models Deliverables Point clouds
Walk Throughs Simulations
Asset Management Accurate measurements
Clash Detection View 360° Images from each Scan / Verify Measurements Data can then be exported to PDMS Software
Intelligent 3D Database
for Condition Surveys &
Life Cycle Management database management system for construction, fit-out and plant asset management that transfers a 3D model from the design office to the plant operator. The Basic Principle Digital Facility MANAGEMENT Asset Virtualisation Control network of
overlapping targets Different Scanners for different roles & projects Speeds
Accuracy For offshore we use phased based scanners
Very fast data collection up to 990,000 pps CaseStudy: Timet Factory CaseStudy: Inlet Pipes CaseStudy: Barge CaseStudy: UWE Digital Facility MANAGEMENT DATABASE ASBUILT MODEL SITE SURVEY REMOTE USER WEB ACCESS or DIRECT DOWNLOAD Fly Through Pointcloud Titanium Metals Corporation (TIMET) is the world's largest fully integrated producer of high quality titanium metal products.
As part of ongoing investment in their Birmingham Plant they required a laser survey and asbuilt model. The survey was required to be carried out in a very small timeframe to avoid disruption to the plant.
Once the survey was completed a 3D asbuilt model was created to allow the engineers to virtually carry out design work and simulation of the installation of 2 new furnaces. Asbuilt Pointcloud Pointcloud 3D
Model 3D Digital Surveys carried out advanced modelling services on the Chickasaw Barge. The barge was scanned in the Gulf of Mexico creating a 3D point cloud.
Digitals UK modelling team then converted it to an asbuilt 3D CAD Model. Made up of two storeys and covering over 10,000 sq m, the UWE conference centre is a vast building. Formerly the Hewlett Packard offices, the building has recently been acquired by the University of Bristol. Parsons Brinckerhoff the consultant engineers carrying out the refit of the building were looking for methods to survey the very complex ceiling void.
Located 4m above ground level and packed with piping and ducts conventional survey methods would have been impossible. Located 60m underground in a confined space this very large sewage inlet pipe posed a number of potential survey issues.
As part of an upgrade projects Digital Surveys carried out a very fast laser survey in under 40 minutes capturing 5 high resolution laser scans. Back in the office this was used to build an accurate 3D model. Company Background Formed in 1988 Range of Survey & Dimensional Control services for Infrastructure / Petrochemical Sectors
Early adopters of 3D Laser Scanning
Small specialist team of Surveyors, Scanners and 3D Modellers SERVICES 3D DATA CAPTURE
VISUALISATION 3D LASER SCANNING 3D INSPECTION 3D MODELLING 3D ASSET MANAGEMENT
NON DESTRUCTIVE TESTING
REVERSE ENGINEERING ASBUILT MODELS
INTELLIGENT PLANT MODELS
BUILDING INFORMATION MODELLING VIRTUAL SITE INSPECTION
HIGH VALUE ASSET MANAGEMENT Plant Room Case Study: Turbine Female Stub Survey Digital Surveys were commissioned by Atlantis Resources to carry out as built surveys on their turbine at Peterhead and Lifting frame.
The turbine had recently come out of the water for repairs. Atlantis required an exact survey of the female stub connector and to check the alignment of key bolt holes.
By also having a 3d model of the lifting frame they could simulate the process for a first time fit from their offices in Singapore. Case Study: Tidal Blade Testing Digital Surveys carried out deflection testing for Atlantis Resources at thier tidal blade test facility in Portsmouth. We also created an asbuilt model of each blade to be checked against the as designed CAD model.