Introducing
Your new presentation assistant.
Refine, enhance, and tailor your content, source relevant images, and edit visuals quicker than ever before.
Trending searches
Learn basic functions of and programing operations of the RT 1523 ASIP radio.
A group of highly motivated soldiers ready to learn.
-function knob -KDU (key display unit)
-AUD/Fill -AUD/Data
-Antenna Housing - P1 (system)
- J5 (GPS) - J6 (Auxiliary)
A. Preparing Radio
1) Set: FCTN knob to LD
Set: CHAN to 1-6 (chan in which data is stored)
B. Entering new Net ID in radio
1) Press: FREQ
Display shows: [ F XXX ]
2) CLR
Display shows: [ F _ _ _ ]
3) enter ID numbers
Display shows: [ F XXX ]
4) Press STO
Demonstrate proficiency of operator tasks and basic programing on the RT 1523
A. Prepare to Perform Task
1. Set RT FCTN knob to LD (load)
2. COMSEC to PT (plain text)
3. MODE to SC (single channel)
4. CHAN to MAN, CUE, or 1-6.
B. Load SC Freq
1)Press: FREQ, CLR, 35000 (Freq), STO
-W4 (fill cable)
- H250 (handmic)
- battery
-Antenna
TM 11-5820-890-10-6
(SINCGARS GROUND ICOM RADIOS)
TM 11-5820-890-10-8
(SINCGARS OPERATOR'S MANUAL)
A. Prepare the RT
1) Set the FCTN to LD
2) Press: TIME button on the right side of the RT Keyboard (Julian date will show, Verify it is correct before moving on)
Press: TIME again to move to hh/mm Net time
B. Manually input Net time/ Zulu time
3) Press: MENU/CLR (will show _ _ _ _ )
4) enter Net time with number keys and press STO (will show XX xx )
****time must be stowed with the
zulu/net time at a full minute
example: 21:22:00 hh/mm/ss****
Ensure radio is zeroed by turning function knob to "Z"
KDU (key display unit) will display" COMSEC ZERO/GOOD"
Turn function knob to TST (test) and wait for radio to display "GOOD"
This completes the BIT testing process
-Set Volume
1. Press MENU
2. Press number key (1-9) for volume setting (0) for WHSP
-Set RT Channel
1. Press MENU (until CHANNEL)
2. Press number key (1-6) for Channel desired; (0) for MAN, (7) for CUE
-Set RT Power
1. Press MENU (until POWER)
2. Press CHG for desired PWR setting
-Set RT Mode
1. Press MENU (until MODE)
2. Press CHG for desired MODE
-Set COMSEC
1. Press MENU (until COMSEC)
2. Press CHG for desired CMSC setting
-Set Backlight
1. Place RT in SQ ON
2. Press FREQ/Backlight
3. Press CHG until desired setting