Introducing
Your new presentation assistant.
Refine, enhance, and tailor your content, source relevant images, and edit visuals quicker than ever before.
Trending searches
chop saw
Safety rules
Safety rules
To avoid losing control or placing hands in the blade path, hold or clamp all material securely against the fence when cutting. Do not perform operations freehand. Never re-cut small pieces. Long material should be supported at the same height as the saw table. remove lose clothing.
Information
A chop saw or drop saw, is a power tool used to make a quick, accurate crosscut in a workpiece at a selected angle. Commonly used for cutting of molding and trimming .It Is used to cut logs into fine planks.
Information
Steel is hard. You could use a hacksaw, an angle grinder, or even a torch to cut it, but an abrasive chop saw is a better choice: Because it uses an abrasive disc instead of a saw blade, it has no teeth to get stuck and can plow through rebar, cast iron, steel pipe, or chunky angle stock.
Information
A chop saw is essentially a circular saw that is mounted on an arm that pivots, creating the ability for greater stability and more accurate cuts. A chop saw that is used to cut wood is called a miter saw and a chop saw that is used to cut metal and other hard material like concrete or brick is called a chop saw.
Information
Other terms that are used interchangeably are an abrasive saw, metal chop saw, abrasive chop saw or a cut-off saw. The biggest advantage of the chop saw is that it comes with an abrasive disc instead of a blade. This disk has no teeth allowing it to cut through very hard material like steel, rebar, or cast iron. The chop saw is to metal workers what the miter saw is to woodworkers. An essential tool for cutting, building or framing with solid, non-wood materials
informtion
Chop saws can make both straight and angled cuts, typically up to 45 degrees. The chop saw is designed for cutting hard metals and so while they may look similar to a miter saw the construction is very different. A few features that are universal with chop saws include a fence that the material is held against. The blade is operated by bringing the handle down across the material. A blade guard covers the blade and retracts as the blade meets the metal. Clamps are also included to secure the material against the fence to create an accurate cut.