Send the link below via email or IMCopy
Present to your audienceStart remote presentation
- Invited audience members will follow you as you navigate and present
- People invited to a presentation do not need a Prezi account
- This link expires 10 minutes after you close the presentation
- A maximum of 30 users can follow your presentation
- Learn more about this feature in our knowledge base article
Do you really want to delete this prezi?
Neither you, nor the coeditors you shared it with will be able to recover it again.
Make your likes visible on Facebook?
You can change this under Settings & Account at any time.
Patient Monitoring System Using GSM and AT89s52
Transcript of Patient Monitoring System Using GSM and AT89s52
YOU A GSM based Patient Monitoring System Contents AT89S52 Block Diagram AT89S52 Power Supply Temperature Sensor - LM35 Features of LM 35 16*2 LCD Module A 16x2 LCD means it can display 16 characters per line and there are 2 such lines.
In this LCD each character is displayed in 5x7 pixel matrix.
This LCD has two registers, namely, Command and Data. Features of Heart Beat Sensor HEART BEAT SENSOR GSM Based Patient Monitoring System-Transmitter Advantages Circuit Diagram Of Receiver Summary Secure, robust and low-power consuming.
Enhances remote sensing capability.
Acknowledges doctor with the correct and fast information of the patients.
Help emergency situations of the patients to be handled quickly.
Operate on multiple channels to avoid interference with other wireless devices or equipments in the hospital. References Guojin Li, Jing Han,” Application of the Medical Care System Based on ZigBee Technology”, IEEE Symposium on Electrical & Electronics Engineering (EEESYM) 2012.
N. Watthanawisuth, T. Lomas, A. Wisitsoraat, A.Tuantranont, “Wireless Wearable Pulse Oximeter for Health Monitoring using ZigBee Wireless Sensor Network”, Electrical Engineering/Electronics Computer Telecommunications and Information Technology (ECTI-CON), 2010 International Conference onMay2010.
“IEEE Standards 802.15.4”,IEEE 2006,http://www.ieee.org Introduction
Block diagram of the project
Heart Beat Sensor
Comparison with other technologies
Advantages and Applications
conclusion Introduction The patients in the ICU need a constant monitoring of their Temperature and heart beat.
This project incorporates sensors to measure important parameters.
Any abnormality felt by the patient is indicated by an alarm signal.
Works even when the patient is in unconscious state.
The patient-staff ratio is very low, so these kind of advanced equipment is necessary. Manufactured by AMTEL laboratories.
Standard features like-
8 K bytes of flash.
256 bytes of RAM.
32 I/O lines.
Full duplex serial port.
On-chip oscillator. LM35is a precision IC temperature sensor with its output proportional to the temperature.
You can measure temperature more accurately than a using thermistors. The sensor circuitry is sealed and not subject to oxidation, etc.
Possesses a low self-heating capability
The output voltage is converted to temperature bya simple conversion factor.
The operating temperature range is from -55°C to 150°C. The sensor consists of a super bright red LED and light detector
Heat beat indication by LED
Instant output digital signal for directly connecting to micro controller to measure Beats per Minute (BPM)
Working Voltage +5V DC
It works on the principle of light modulation by blood flow through finger at each pulse. A place in the hospital where very ill patients are monitored very closely.
The patients in the ICU need a constant monitoring of their Temperature and heart beat. This project is a working model, which incorporates sensors to measure important parameters namely the Temperature, Respiratory temperature and Heart Beat.
The patient can be analyzed by doctors in any part of the hospital wherever they are.
Even when the patient is in an unconscious condition, all the parameters will be sensed and doctor will be cautioned, thus it reduces doctor’s workload and also gives more accurate results.
Thus it reduces doctors work load and also gives more accurate results,
We have also incorporated saline monitoring system which gives an alarm when the saline bottle about to empty.