Create your own polished presentation in minutes. Just describe what you need.
Free to try, no credit card requiredRole of Mathematics in building a sustainable future: Flood Management
FLOODS
Flooding is a temporary overflow of water onto land that is normally dry. Floods may:
One-third of the annual natural disasters and economic losses, and more than half
of the respective victims are flood related. These hazards are likely to become
more frequent and more relevant in the future, due to the effects of increase in
population, urbanization, land subsidence and the impacts of climate change.
Mathematical modeling approach aims to provide the best means for assessing and,
subsequently, reducing the vulnerability of rural and urban flood prone areas.
Diya Chauhan
X-B
Bibliography
Floods in India
Conclusions
A flood event is a natural event of great complexity. The hydrological parameters of a flood (magnitude, frequency, celerity, volume, duration) reflect the stochastic behaviour of precipitation, interception, infiltration, evapotraspiration, soil moisture, overland and ground flows and river channel hydraulics. Models not only help in understanding these flood phenomena, but are also essential for flood risk assessment of the current situation and for assessment of expected changes.
From June to September each year, monsoon rains fall in southern Asia. The rains are crucial to agriculture, but at the same time pose hazards to crops, homes, and people. Floods often submerge fields, destroy buildings, and contaminate drinking water.
The Indian states affected by floods are highlighted in the adjacent picture.
By using models an attempt is made to replace trial and error-based strategies
as practised in the past with more physically-based measures. The modelling tool
aims to provide the best concept for assessing and reducing the vulnerability of
rural and high-value urban flood-prone areas as well as industrial zones.
Mathematical models are useful tools for the design of efficient flood
protection strategies and excellent supporters of decision makers, since they
enable a complex evaluation of cost benefit analysis of particular proposal for
flood protection measures.
How much do floods cost India?
The case of Kerala flood disaster, 2018
The lush, coastal state of Kerala in the southernmost part of India is no stranger to heavy rainfall. The monsoon season brings an average of 2,700 mm of rain to the state, which is more than what the Philippines gets annually. Last year’s monsoon season, however, wasn’t average.
The monsoons soaked Kerala with above average rainfall for two months, and then delivered an immense spike. In the first 19 days of August, 758 mm of rain poured over Kerala — 164% above normal. In a few days, more rain fell over this state the size of Switzerland than what falls over the US in a year.
Kerala was inundated. There were widespread floods and thousands of landslides. The disaster killed over 480 people and affected nearly 5.4 million. A massive response operation was mobilized by the government, civil society, private sector, and local fishermen. Over 260,000 were evacuated and more than 1.4 million were provided shelter in 3,200+ relief camps.
At the request of the Government of India — the Government of Kerala, the World Bank, and the Asian Development Bank conducted a Joint Rapid Disaster Needs Assessment to quantify the damage and assess the long-term recovery needs. Considering the impact on housing, infrastructure, utilities, livelihoods, health, environment, and cultural heritage — the estimated recovery cost is about US$ 3.5 billion, just for the priority sectors.
This scale of damage from floods is not an outlier for India. The average annual loss from floods in the country is estimated to be US$ 7.4 billion
Types of models used
Research work on flood dynamics has traditionally specialised in different mathematical models. They can roughly categorized into stochastic and deterministic models.
Stochastic models are based on flood frequency analysis, defined as the means by which flood discharge magnitude is related to the probability of its being equalled or exceeded in any year or to its frequency of recurrence or return period.
Deterministic models are, generally, based on physical properties of elements that feature or influence the phenomenon under investigation, such as the catchment characteristics, the channel geometry, the rainfall-runoff process.
Hybrid Models
The hybrid model offers the advantage of operationally combining the flood routing and the determination of the flood level. Moreover, this procedure opens up the potential for modeling more dynamic flood events such as ice jam release surges, which cannot be handled by traditional hydrologic or hydraulic modelling approaches.
Stochastic models
Estimation of floods corresponding to specified return periods is essential for the design of flood protection measures, assessment of regions at risk of flooding, and the pertinent management of flooded areas.
Due to climatic variability, which drives flood events, stochastic modeling has become widely applied to estimate the magnitude of flood corresponding to a specified risk
Hydrologic models
Hydrologic modelling involves the balancing of inflow, outflow and volume of storage through the use of continuity equation. A second relationship, the storage-discharge relation, is also required between outflows rate and storage in the system. This implies that water surface is level through the watercourse, usually a reservoir or lake. More complex relationships are to be sought for long and narrow reservoirs or open channels where storage is a function of both inflow and outflow.
Flood frequency analysis
Flood frequency analysis was developed, in the first instance, in response to the need for information for the safe and economical design of engineering structures, either for the conveyance of flood flows (bridges, culverts, diversion channels, reservoirs, spillways) or for the protection or mitigation from flooding of land and property (embankments and walls). Moreover, this procedure is currently used for planning purposes and the design of land-use categories based on flood zoning with respect to vulnerability.
The attractiveness of hydrologic modelling consists in its relative simplicity compared with hydraulic models. However, these procedures neglect backwater effects and are not accurate for rapidly rising hydrographs routed through mild to flat sloping rivers. They are also inaccurate for rapidly rising hydrographs in long reservoirs.
Frequency analysis is most commonly applied to peak discharges, instantaneous or averaged over a specified duration. Analysis is carried out on an observed historic record of river flow with the aim of assessing future probabilities of exceedence. It is also usually assumed that there will be not temporal change in the underlying statistics due to climate variability or to land use changes.
Hydraulic models
A large number of probability distributions and methods of application have been used for interpolation or extrapolation. The two main approaches to select the flood series for fitting a stochastic model to the observed floods are based on the series for maxima annual flows (MAF) or partial duration series of floods (PDF). The MAF series selects the maximum flood event for each year, while the PDF series consists of all flood peaks above a specified magnitude.
A good understanding of a complex flooding event can only be achieved by means of hydraulic models, because the flow rate, velocity, and depth vary in space along the watercourse and across a floodplain and/or a flood prone area. Estimation of these properties can be obtained by using the complete differential equations of 1D or 2D unsteady flow, known as the De Saint Venant (SV) or shallow water (SW) equations. Those equations allow the flow rate and water level to be computed as functions of space and time rather than time alone, as in the lumped flow routing methods. Distributed flow routing based on the complete SV or SW equations is known as hydrodynamic routing.
Deterministic models
Deterministic modeling (flood routing) can be defined as a mathematical procedure for predicting the changing magnitude, speed and shape of a flow wave as a function of time (i.e. the flow hydrograph) at one or more points along a watercourse. The watercourse may be a river, stream, reservoir, estuary, canal, discharge ditch, or storm sewer.
The flow hydrograph can result from precipitation runoff, reservoir releases, landslides into reservoirs, or tides. Flood routing may be classified as hydrologic (lumped), or hydraulic (distributed), or hybrid.
Create your own polished presentation in minutes. Just describe what you need.
Free to try, no credit card required