Copy of Falling Protection

PV
by Poul Erik Viuff0 views·Updated Dec 8, 2013
Powered by AI

Need to present on this topic?

Create your own polished presentation in minutes. Just describe what you need.

Free to try, no credit card required

Transcript

Questions?

Falling Protection

Bibliography

1. Material sourced in this assignment was taken from:

  • humanservices.alberta.ca/documents/WHS-LEG_ohsc_2009.pdf

Photo credits:

  • figure 1: google under fall safety
  • figure2: google under paper work
  • figure 3: google images under Calvin and Hobbs questions

2.Material sourced for the knot notes came from "The Ultimate Encyclopedia of Knots and Ropework" by Geofrey Budworth

Exemptions/ Exceptions to the Rules

Rescue personnel involved in training or in providing emergency rescue

services may use equipment and practices other than those specified in the fall protection plan

Requirements and Guidelines for General Protection

Falling prevention is required when:

  • A vertical distance of 3 meters or greater
  • If there's an unusual possibility of injury or into/ onto a hazardous substance or object. Through an opening in a work surface.

Other prevention system that can be used are:

  • personal fall arrest system
  • equally effective fall protection system that meets requirements
  • these are provided by the employer.

To meet the requirement under an employer must install an engineering control such as a

 guardrail. 

  • The guardrail may be used for a permanent work area with a distance of 1.2-3m. However if this isn't reasonable a travel restraint system maybe used.

Acceptable Forms of Protection

Fall Protection Plan

An employer must develop procedures that comply with a 

protection plan for a work site if a worker at the work site may fall 3 meters or more with out a protected by guardrails. 

Some specifications are:

  • identify the hazardous area
  • what actions are being taken to avoid danger from the hazard ( assemble,maintain, inspect...)

The employer must ensure that the fall protection plan is available at the 

work site and is reviewed with workers before work with a risk of falling begins. 

 

The  employer  must  ensure  that  the  plan  is  updated  when  conditions 

affecting fall protection change

Some equipment used for fall prevention is:

  • Full body harness
  • Body belt
  • Lanyard
  • Shock absorber
  • Connection

Differences for Temporary or Permanent Work Areas

ANCHORS

Permanent

Temporary

  • 16kn/worker
  • twice the maximum arresting force
  • travel restraint = 3.5kN/worker
  • personal fall arrest system = 16kN
  • time specified

FULL BODY HARNESS