Loading presentation...

Present Remotely

Send the link below via email or IM

Copy

Present to your audience

Start remote presentation

  • Invited audience members will follow you as you navigate and present
  • People invited to a presentation do not need a Prezi account
  • This link expires 10 minutes after you close the presentation
  • A maximum of 30 users can follow your presentation
  • Learn more about this feature in our knowledge base article

Do you really want to delete this prezi?

Neither you, nor the coeditors you shared it with will be able to recover it again.

DeleteCancel

Steps for making the coat hook project!

No description
by

brooke robertson

on 4 June 2015

Comments (0)

Please log in to add your comment.

Report abuse

Transcript of Steps for making the coat hook project!

Steps for making the coat hook project!
Making the hook.

step 3
the 3rd step is to drill the holes in your piece of metal.

the tools you will need are.
pillar drill
burr remover
Step 6
the next step is to clean the surface of the metal.

the tools you will use are.
emery cloth
wet and dry paper
steel wool
brasso
Step 2
the second step is to mark out the position for the drill.

the tools you will use is
Engineers square
Step 1
the first step is to file the metal to round edges.
the tools you use is.
A flat file
emery cloth
wet and dry paper
Step 4
the next step is too drill countersink.

the tools you will use are.
hand drill
countersink bit
G clamp
Step 7
The last step is to shape the metal to form the curve.

the tools you will use are.
hide mallet
former
engineer square
Step 5
Heat the metal to anneal it.

the tools you used are.
soap
forge
tongs
bucket of water
Steel rule
scribe
centre punch
Full transcript