Send the link below via email or IMCopy
Present to your audienceStart remote presentation
- Invited audience members will follow you as you navigate and present
- People invited to a presentation do not need a Prezi account
- This link expires 10 minutes after you close the presentation
- A maximum of 30 users can follow your presentation
- Learn more about this feature in our knowledge base article
12-step console procedure
Transcript of 12-step console procedure
Raise the buss fader to unity gain (if a buss is used)
Bring the stereo buss fader to
Soundcraft Ghost - 12 steps - signal flow
Arm the appropriate track on the multi-track recorder and chose the monitoring mode
On the input channel, choose the input type.
Bring the channel fader to
Route the output of the channel to the multi-track
On the monitor channel, choose the input type
Assign the monitor channel output to the mix buss.
Adjust the input level of the signal.
Raise the channel fader to the desired monitoring level
Choose the control room monitor source.
Turn up the control room monitor fader.
12 step Console Operation Procedure
1 - 6
12 step Console Operation Procedure:
with the line button
Adjust the active gain to raise mic level to line level
(numbered) route signals to specific tracks on the multi-track.
Direct out is a passive choice to route signals to the multi-track
Unity Gain on a fader is represented with
meaning 0 change in volume.
Unity Gain: state of a device where the input is equal to the output.
Adjust the monitor level to desired volume
is common for the stereo buss (mix buss) assignment button.
Prezi by: Jason Moss
Pictures by Bryant Mendez