### Present Remotely

Send the link below via email or IM

• Invited audience members will follow you as you navigate and present
• People invited to a presentation do not need a Prezi account
• This link expires 10 minutes after you close the presentation

Do you really want to delete this prezi?

Neither you, nor the coeditors you shared it with will be able to recover it again.

You can change this under Settings & Account at any time.

# Impedance Spectroscopy

No description
by

## Pushparaj Pathak

on 13 November 2012

Report abuse

#### Transcript of Impedance Spectroscopy

Simulation of Impedance Spectroscopy using COMSOL Pushparaj Pathak Interdigitated Electrode Array Impedance Spectroscopy Impedance is opposition to flow of current by a complex system (containing energy storing as well as dissipating device)
In impedance spectroscopy the impedance of a system over a range of frequency is measured
The presence of a cell (dielectric) between two electrodes changes the impedance of the device
This impedance change forms the basis of sensing bio molecules
Equivalent Circuit [2] Model Equation IDE with cells Model Paramaters COMSOL Setup

The IDE structure with buffer solution was modeled in 1D
The Electric currents (ec) node was used to solve the physics
The voltage (50 mV) was applied to the system using a Terminal node
The study was done in frequency domain, the frequency was swept from 1e-5 Hz to 1e9 Hz
The impedance was obtained by taking the inverse of the admittance obtained at the terminal
Impedance for both cases: IDE without cell and IDE with cell was calculated
Impedance Comparison Impedance of IDE with cell Impedance of IDE without cell Electric double layer [1] [1]http://en.wikipedia.org/wiki/File:Double_Layer.png

[2]“Model of an Interdigitated Microsensor to Detect and Quantify Cells Flowing in a Test Chamber: Papers & Presentations: 9400.” [Online]. Available: http://www.comsol.com/papers/9400/. [Accessed: 13-Nov-2012].
References: 1 2 3 4 Close up 5 6 7 8 9 10 11 12
Full transcript