Send the link below via email or IMCopy
Present to your audienceStart remote presentation
- Invited audience members will follow you as you navigate and present
- People invited to a presentation do not need a Prezi account
- This link expires 10 minutes after you close the presentation
- A maximum of 30 users can follow your presentation
- Learn more about this feature in our knowledge base article
Do you really want to delete this prezi?
Neither you, nor the coeditors you shared it with will be able to recover it again.
Make your likes visible on Facebook?
You can change this under Settings & Account at any time.
Transcript of WALL SECTION
-supports a ceiling, roof, or floor
-usually 16", 18", or 24" apart Joist AND THATS HOW A TYPICAL WALL SECTION
LOOKS LIKE :D Weeping tile - Gathers water away from the house
-Prevents the basement from flooding
-covered in gravel. Footing -prevents the house from sinking
-makes sure the house is evenly leveled
-Usually 4" x 24"
-rebar is also to be put into, for the concrete
wall Concrete wall Concrete wall -usually 12" thick and 8' x 8 1/2" tall
-placed on top of the footing, so the rebar
holds it in place
-at the top, there is an anchor bolt Studs -used for carrying vertical load such as
joist, headers, and sub-floor
-usually 2' x 4" or 2' x 6"
-there typically placed 16", sometimes placed
12" or 24" Slab
-usually build out of concrete
-it's 4" of concrete, and under the slab is
usually 4" of sand, gravel, or crush stone. To cover up the studs, dry wall is usually
used. Comes in 4' x 8' 1/2". 1/2" drywall is used to cover
the joist at the bottom 3/4" thick plywood is placed
on top 1/2" drywall usually
3/4" installation Eavesdrop tiling Joist There is usually installation inside the roof Holes are put in to provide air circulation
to the attic