Send the link below via email or IMCopy
Present to your audienceStart remote presentation
- Invited audience members will follow you as you navigate and present
- People invited to a presentation do not need a Prezi account
- This link expires 10 minutes after you close the presentation
- A maximum of 30 users can follow your presentation
- Learn more about this feature in our knowledge base article
Transcript of Extension Cord
Extension Cord??? It is a length of flexible electrical power cable (flex) with a plug on one end and one or more sockets on the other end (usually of the same type as the plug). Residential Extension Cords with Two Wires
•Two-wire extension cords are usually intended only for home use for double-insulated devices and small appliances. Heavy-Duty Extension Cords with Three Wires
•Extension cords with three wires are designed more for outdoor appliances and electric power tools. Telephone Extension Cords
•There are three basic telephone extension cords: RJ-11, RJ-12 and RJ-14, according to Picky Guide. TYPES
CORD PROCEDURES Materials needed
in making an
Extension Cord Remove insulation of both wires 1 cm. long using long nose and side cutting pliers. Scrape bare wire until shiny. Twist the wire strands. Split the cord wires about 8 centimeters long. Split the cord wires at the other end about 4 centimeters long, then follow step no. 4. Open the convenience
outlet then remove the screw. Connect the wires to the terminal screw of the convenience outlet, tighten them and replace the cover. Test the Extension Cord. Thank You Very Much!!!
-Mr. Jon - Jon A. Gasga Your imagination, my dear fellow, is worth more than you imagine.
Precautions Keep your hands dry when you touch electrical switches or appliances. Do not overload an electrical socket by connecting too many appliances at a time. Do not chat or fool around when working. Do not make jokes with anyone with working. Disconnect the electrical source before working on any electrical wire, tools or equipment. Clean and store your tools properly after using. How to make an
Extension Cord? Remove the screw of the plug and detach the cover. Make a loop on terminal wires and connect the wires to the terminal screw of the plug.