Send the link below via email or IMCopy
Present to your audienceStart remote presentation
- Invited audience members will follow you as you navigate and present
- People invited to a presentation do not need a Prezi account
- This link expires 10 minutes after you close the presentation
- A maximum of 30 users can follow your presentation
- Learn more about this feature in our knowledge base article
Do you really want to delete this prezi?
Neither you, nor the coeditors you shared it with will be able to recover it again.
Make your likes visible on Facebook?
Connect your Facebook account to Prezi and let your likes appear on your timeline.
You can change this under Settings & Account at any time.
Making a Desk Chair
Transcript of Making a Desk Chair
Unscrew the wood-top from the metal base. Step 1
Go to your local thrift store(s) and buy a desk that you would typically find in an elementary school. UPHOLSTERED DESK-CHAIR
you will need the following:
hot glue gun
2 yards of upholstery fabric (at least 54" wide)
thread (matching the fabric)
spray paint Step 3
Buy a foam pad or feather
pillow as your seat cushion.
(I used a feather pillow
beacause it is easier to
upoholster.) Step 4
Measure your pillow size and cut it down if
necessary to fit the size of the desk. Step 5
Sew the three sides of the pillow covering together and leave a 14" space open on the fourth side. After sewing turn the covering inside out and push corners out a 90 degree angle. Suff the pillow into the covering and hand stitch the 14" hole with a simple stitch. Step 6
Start upholstering. Start by hot gluing the fabric to the bottom side near the front of the seat. Step 7
Continue the gluing process on the top side of desk and get the fabric tight and in place. Then continue onto the sides abd back. Step 8
There are many ways to do corners but I folded mine like the picture above. Step 9
Fold in corners and glue the edges like the picture shown.